Enduro Recovery Fender Grab Strap

The Enduro Recovery Fender Grab Strap is simplicity at its best.  It requires no tools to install and can be installed or removed in less than a minute for either bike maintenance, repair, or cleaning.

This grab strap is made of 1” MILSPEC tubular nylon webbing with an approximate break strength of 4000lbs.  It can accommodate either grabbing it with your hand or quickly snapping a carabiner to it in order to pull or winch the bike free.  The main strap is designed to be wrapped around the shock tubes below the triple tree clamps, instead of on top of them like other recovery straps.  This design prevents the webbing from pushing or lifting against any of the bike’s plastics or headlight assembly and breaking them.  We selected the MILSPEC 1” tubular nylon webbing not only due to it’s break strength, but due to it not stretching when it gets wet like other webbing can.  To prevent the main strap from working its way down the shock tube on either side since it is installed below the fork clamps, and getting caught in the tire when the shocks are compressed or making it difficult to reposition the straps for use, it comes with the included Polypropylene Safety Strap.  This strap helps maintain the Enduro Recovery Fender Grab Strap in place directly under the bottom shock tube clamp so that you have consistent placement every time you need it.  We selected the Polypropylene webbing for the safety retention strap since it does not shrink when wet, and has a high resistance to mildew.

The main retention feature of the Enduro Recovery Grab Strap is the chromed steel welded loop that locks the webbing into place by the folded double stitched ends of the 1” tubular webbing.  This welded loop has been tested to approximately 750lbs of shock load without any issues.  This system has even been used to hoist the bike up off the ground as seen in the video below.  This Enduro Recovery Fender Grab Strap was designed on a 2015 KTM 500EXC.  It is universal though and will fit other KTM dirt bikes as well as other brands of dirt bikes of similar size.  It should fit pretty much any dirt bike.  Please call us for fitment questions.

URBAN-ERT SLINGS, LLC and its designees are not responsible for improper installation or use.  Like anything in the world that is subject to hard use during off & on road motorcycle riding, it isn’t fallible and stuff happens.  By installing & using this product, you assume all the risk involved with using this product.  We will warranty this product to be free from defect and replace it as a whole or the individual components free of charge for the lifetime of the product no matter who submits the claim.

100% MADE IN THE USA, BY ACTUAL AMERICANS!  Yeah! ‘MURICA!